Tag Archives: Amoracast

Jewelry Tutorial – How To Use The Cat Ear Bead Cap To Make Kitty Earrings

Use a long ball pin (2″ long) and thread the 3mm beads for the tail, then beads for the body bead and then the cap.  The cap fits ideally an 8mm bead.  If your bead is irregular in shape, adjust the cap slightly to fit snug around the bead. Using a pair of round nose pliers, make a loop with […]

Jewelry Tutorial – Making Bell Shaped Earrings with Lily Of The Valley Cone

You can make bell shaped earrings using the Lily of the Valley Bead Cones by Amoracast.   First, using wire thread all of the chains or drops that you’ve wire wrapped, in a round loop. Put all of the chains inside and then wire wrap that closed, making sure that the loop is big enough for […]

Jewelry Tutorial – How to Use the Side Cail as Bail for Side Drill Drops

The Side Cail is the perfect bail for briolettes (side drilled drops) Begin by forming the Side Cail to fit the drop – measuring the width where the drill holes are.  The width of stones usually varies in most strands, so you want to do this for individual drops and not do them all at once.  […]

Jewelry Tutorial – How to Wire Wrap Beads Along the Modern Earring Hook by Amoracast

Here is how I made these earrings using the Amoracast Modern Hook and 2 mm rainbow moonstone beads.  Start with 26 gauge wire – and actually the longer the better.  Thread all of the beads and hold at the bottom using one hand (and actually it’s better with a pair of pliers) to wrap the […]

Jewelry Tutorial – How to Make An Angel Pendant Using Calla Lily Cone and Angel Wing Spacer Bead By Amoracast

We are using 3mm bicones and 2 inch chain for the legs and feet, the Calla Lily cone for the skirt and Angel Wings.  First make the legs.  Take a small head pin and thread the 3mm bicone.  Make a loop and slip the chain inside the loop before closing it by wire wrapping.  Use […]

Jewelry Tutorial – How to Make Angel Pendant with Angel Wing Spacer Bead by Amoracast

To Create, use a stone pear shaped bead before the skirt, a daisy spacer, an angel wing spacer bead by Amoracast, followed by a 4mm pearl and another daisy spacer for the halo. You can substitute the beads for the skirt and head, but the essential component are the wings.   Thread all of the components, […]

Jewelry Tutorial – How to easily make reindeer earrings with the Antler Bead Cap by Amoracast

First thing you do is thread all of the beads using a long head pin (at least 1.5″ – 3.5cm) , from the bottom up. Then, with a pair of round nose pliers, make a loop.  Make sure that it is the size you want, with the tip of the pliers, so that it is […]

The Pendulum Bail

Not only are these bails stunning, they are easy to use! .  To make this necklace you are going to need the following: 1.  Amoracast Pendulum Bail 2.  A Front Drilled Pendant 3. Chain 4.  A Jump Ring The Pendulum Bail, by Amoracast, is elegant in aesthetic as it is in design.  It works on the […]

Huggie Studs Made Easy

This video shows you how to set a Herkimer Diamond into Huggie Prong Earring stud component. (You can set it free hand, but I am using a watch maker tool that has a hole long enough for the post. You can also use a vise or drill a small hole into a block of wood. […]

Gold Vermeille & Gold-Filled, What’s the Difference?

Gold vermeille ( pronounced ‘vermay’ ) refers to sterling silver that has been plated with a layer of gold. The base metal is usually sterling silver but, in some markets, this isn’t always the case.  If the item is to qualify as gold vermeille it must have at least one 10 karate layer of gold […]

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.