Test out our 1.74mm Textured Tube Station Cable Round Two Toned chain with this 7″ sample.
This is sold by individual 7 inch samples pieces. You will not receive continuous lengths if ordering more than one piece.
If you wish to purchase this chain by the meter please click this linkHow This Chain is Made: The tubes on this chain are held in place by tension rather than solder. Their position is held by the link, so a slight amount of movement is normal. Each tube may wiggle a little while still staying in place. Because of this, if the chain stretches, the tubes may shift along the stretched section. This design is beautiful and unique, but it does require a bit more care than an average chain. For that reason, it is not recommended for 24/7 wear.
Tube Measurement:
- Size: LxW- 4.20 x 1.74mm
- Spacing between tubes averages 9.60mm
- Metal: Sterling Silver
Cable Link Measurement:
- OD: LxW- 1.35 x 2.47mm
- Wire Thickness: 0.35mm
- ID: 0.75mm
- Metal: Gold Filled
Recommended Jump Rings:
A) For the End Link of the chain:
- What gauge open jump ring to use: Up to 22ga, 0.64mm
- Recommended open jump ring/ wire: Link is very small. Best to wire wrap if not soldering. Wire wrap with 24ga Round Wire By-the-Meter
- If soldering / welding – 3mm 22ga, 3mm 24ga or 2.3mm 26ga
B) For the Links Within the chain:
-
- What gauge open jump ring to use: Up to 22ga, 0.64mm
- Recommended open jump ring/ wire: Link is very small. Best to wire wrap if not soldering. Wire wrap with 24ga Round Wire By-the-Meter
- If soldering / welding – 3mm 22ga, 3mm 24ga or 2.3mm 26ga
- What gauge open jump ring to use: Up to 22ga, 0.64mm
Recommended Findings for the Textured Tube Cable Round Chain:
- Clasps – 3.5x8mm Rectangle Lobster , 5x9mm Rounded Lobster or 5mm Spring
- Soldered Ring (Closed) – 5mm 22ga or 5mm 20.5ga
Click here to learn about gold filled, plated and vermeil
View Abbreviation Guide
Tips, Tricks and How To's! Follow Stones and Findings on YouTube
