Test out our 1.80mm Satellite Beaded Cable chain with this 7″ sample.
This is sold by individual 7 inch samples pieces. You will not receive continuous lengths if ordering more than one piece.
If you wish to purchase this chain by the meter please click this link
Bead Measurement: 1.03 x 1.80mm
Cable Link Measurement:
- OD: LxW- 1.09 x 1.38mm
- Thickness: 0.30mm, 29.5ga
- ID: 0.51mm
- Average spacing between beads: 11.35mm
Recommended Jump Rings:
A) For the End Link of the chain:
-
-
- What gauge open jump ring to use: Up to 24ga, 0.51mm
- Recommended open jump ring/ wire: Link is very small. Best to wire wrap if not soldering. Wire wrap with 24ga Round Wire By-the-Meter
- If soldering / welding – 3mm 24ga or 2.3mm 26ga
- 24ga is a tight fit. You can enlarge link with a pin or thumbtack. Watch this video to see how to enlarge the end loop for easier use.
-
B) For the Links Within the chain:
These jump rings are perfect for sizing your permanent jewelry pieces and for attaching charms along the chain.
- What gauge open jump ring to use: Link is too small to allow a jump ring
- Option #1: Cut the section of chain and use jump ring listed above
- Option #2: Are you sizing a Permanent Jewelry Bracelet? Try this Hack
Recommended findings for the Satellite Cable Chain:
- Clasps – 5mm Spring Clasp, 3.5x8mm Rectangle Lobster Clasp or 5x9mm Rounded Lobster Clasp
- Soldered Ring (Closed) – 5mm 22ga Closed Rings or 5mm 20.5ga Closed Ring
Click here to learn about gold filled, plated and vermeil
View Abbreviation Guide
Tips, Tricks and How To's! Follow Stones and Findings on YouTube
