Test out our 1.85mm Satellite Beaded Cable chain with this 7″ sample.
This is sold by individual 7 inch samples pieces. You will not receive continuous lengths if ordering more than one piece.
If you wish to purchase this chain by the meter please click this link
Bead Measurement: 1.10mm x 1.85mm
Link Measurement:
- OD: LxW- 1.10 x 1.30mm
- Thickness: 0.30mm, 28ga
- ID: 0.52mm
- Average spacing between the beads: 11.22mm
Recommended Jump Rings:
A) For the End Link of the chain:
-
-
- What gauge open jump ring to use: Up to 24ga, 0.51mm
- Recommended open jump ring/ wire: Link is very small. Best to wire wrap if not soldering. Wire wrap with 24ga Round Wire By-the-Meter
- If soldering / welding – 3mm 24ga or 2.3mm 26ga
- 24ga can be a tight fit. You can enlarge link with a pin or thumbtack. Watch this video to see how to enlarge the end loop for easier use.
- What gauge open jump ring to use: Up to 24ga, 0.51mm
-
B) For the Links Within the chain:
These jump rings are perfect for sizing your permanent jewelry pieces and for attaching charms along the chain.
-
-
- What gauge open jump ring to use: Link is too small to allow a jump ring
- Option #1: Cut the section of chain and use jump ring listed above
- Option #2: Are you sizing a Permanent Jewelry Bracelet? Try this Hack
- What gauge open jump ring to use: Link is too small to allow a jump ring
-
Recommended Findings for the 1.85mm Satellite Beaded Cable Chain:
- Clasps – 3.5x8mm Rectangle Lobster , 5x9mm Rounded Lobster or 5mm Spring
- Soldered Ring (Closed) – 5mm 22ga
Click here to learn about gold filled, plated and vermeil
View Abbreviation Guide
Tips, Tricks and How To's! Follow Stones and Findings on YouTube
