Test out our Blue Aqua Enamel Twisted Curb chain with this 7″ sample.
This is sold by individual 7 inch samples pieces. You will not receive continuous lengths if ordering more than one piece.
If you wish to purchase this chain by the meter please click this link
Twisted Curb Link Measurement:
- OD Small link: LxW – 1.42mm x 1.98mm
- Thickness: 0.40mm, 26ga
- ID Small link: 0.66mm
Enamel Measurement:
- LxW: Average 4.32mm x 2.35mm
- Thickness: 1.17mm
- Spacing between beads averages 4.49mm
- About Enamel: The enamel beads are fused to the chain with high heat. They are long lasting, however if high pressure is applied, these beads can break or crack. If exposed to chemicals, you may see discolouring.
Recommended Jump Rings:
A) For the End Link of the chain:
- What gauge wire to use: Up to 22ga, 0.64mm
- Recommended: Link is very small. Best to wire wrap if not soldering. Wire wrap with 24ga Round Wire By-the-Meter
- If soldering / welding: 3mm 22ga, 3mm 24ga or 2.3mm 26ga
B) For the Links Within the chain:
These jump rings are perfect for sizing your permanent jewelry pieces and for attaching charms along the chain.
-
- What gauge wire to use: Up to 26ga, 0.40mm
- Recommended: Link is very small. Best to wire wrap if not soldering. Wire wrap with 26ga Wire By-the-Meter
- If soldering / welding: 2.3mm 26ga
- What gauge wire to use: Up to 26ga, 0.40mm
Recommended Findings for the Aqua Blue Enamel Curb Chain:
- Clasps – 3.5x8mm Rectangle Lobster , 5x9mm Rounded Lobster or 5mm Spring
- Soldered Ring (Closed) – 5mm 22ga or 5mm 20.5ga
Click here to learn about gold filled, plated and vermeil
View Abbreviation Guide
Tips, Tricks and How To's! Follow Stones and Findings on YouTube
