Test out our Black Enamel Twisted Curb Chain with this 7″ sample.
This is sold by individual 7 inch samples pieces. You will not receive continuous lengths if ordering more than one piece.
If you wish to purchase this chain by the meter please click this link
Tarnish Resistant Coating: This chain has been treated with a hypoallergenic molecular bonding process that will help your pieces resist tarnishing. It protects against in stock oxidation – UV rays while on display, while in storage and from customers trying on the pieces. This treatment will keep your pieces bright longer but still allow you to solder or chemically oxidize the chain.
Twisted Curb Link Measurement:
- OD Small link: LxW – 1.42mm x 1.98mm
- Thickness: 0.40mm, 26ga
- ID Small link: 0.66mm
Enamel Measurement:
- LxW: Average 4.32mm x 2.35mm
- Thickness: 1.17mm
- Spacing between beads averages 4.49mm
- About Enamel: The enamel beads are fused to the chain with high heat. They are long lasting, however if high pressure is applied, these beads can break or crack. If exposed to chemicals, you may see discolouring.
Recommended Jump Rings:
A) For the End Link of the chain:
- What gauge wire to use: Up to 22ga, 0.64mm
- Recommended: Link is very small. Best to wire wrap if not soldering. Wire wrap with 24ga Round Wire By-the-Meter
- If soldering / welding: 3mm 22ga, 3mm 24ga or 2.5mm 26ga
B) For the Links Within the chain:
These jump rings are perfect for sizing your permanent jewelry pieces and for attaching charms along the chain.
-
- What gauge wire to use: Up to 26ga, 0.40mm
- Recommended: Link is very small. Best to wire wrap if not soldering. Wire wrap with 26ga Round Wire By-the-Meter
- If soldering / welding: 2.5mm 26ga
- What gauge wire to use: Up to 26ga, 0.40mm
Recommended Findings for the Black Enamel Curb Chain:
- Clasps – 3x8mm Rectangle Lobster , 5x9mm Rounded Lobster or 5mm Spring
- Soldered Ring (Closed) – 5mm 22ga or 5mm 20ga
View Abbreviation Guide
Tips, Tricks and How To's! Follow Stones and Findings on YouTube
