Test out our 2mm Beaded Cable Flat Mixed Metal Chain with this 7″ sample.
This is sold by individual 7 inch samples pieces. You will not receive continuous lengths if ordering more than one piece.
If you wish to purchase this chain by the meter please click this linkBead Measurement:
- Size: 2.00mm
- Spacing between beads averages 8.40mm
- Metal: Sterling Silver
Cable Link Measurement:
- OD: LxW- 1.50 x 0.96mm
- Wire Thickness: 0.29, 29ga
- ID: 0.41mm
- Metal: Gold Filled
Recommended Jump Rings:
A) For the End Link of the chain:
- What gauge open jump ring to use: Up to 26ga, 0.40mm
- Recommended open jump ring/ wire: Link is very small. Best to wire wrap if not soldering. Wire wrap with 26ga Wire By-the-Meter
- If soldering / welding – 2.3mm 26ga
- 26ga is a tight fit. You can enlarge link with a pin or thumbtack. Watch this video to see how to enlarge the end loop for easier use.
B) For the Links Within the chain:
These jump rings are perfect for sizing your permanent jewelry pieces and for attaching charms along the chain.
- What gauge open jump ring to use: Link is too small to allow a jump ring
- Option #1: Cut the section of chain and use jump ring listed above
- Option #2: Are you sizing a Permanent Jewelry Bracelet? Try this Hack
Recommended Findings for the Beaded Cable Chain:
- Clasps – 3.5x8mm Rectangle Lobster , 5x9mm Rounded Lobster or 5mm Spring
- Soldered Ring (Closed) – 5mm 22ga or 5mm 20.5ga
Click here to learn about gold filled, plated and vermeil
View Abbreviation Guide
Tips, Tricks and How To's! Follow Stones and Findings on YouTube
