Test out our White Enamel Half Dapped Sunburst Paperclip chain with this 7″ sample.
This is sold by individual 7 inch samples pieces. You will not receive continuous lengths if ordering more than one piece.
If you wish to purchase this chain by the meter please click this link
Paperclip Link Measurements:
- OD – LxW: 3.77mm x 1.60mm
- ID: 2.20mm x 0.78mm
- Wire Thickness: 0.42mm, 26ga
Enamel Sunburst Oval Measurements:
- LxW: Average – 4.03mm x 2.30mm
- Enamel Thickness: Average- 1.60mm
- About Enamel: The enamel beads are fused to the chain with high heat. They are long lasting, however if high pressure is applied, these beads can break or crack. If exposed to chemicals, you may see discolouring.
Recommended Jump Rings:
A) For the End Link of the chain:
- What gauge open jump ring to use: Up to 20ga, 0.84mm
- Recommended open jump ring/ wire: 4mm 20ga
- If soldering / welding – 3mm 22ga, 3mm 24ga or 2.3mm 26ga
B) For the Links Within the chain:
These jump rings are perfect for sizing your permanent jewelry pieces and for attaching charms along the chain.
- What gauge open jump ring to use: Up to 20ga, 0.84mm
- Recommended open jump ring/ wire: 4mm 20ga
- If soldering / welding – 3mm 22ga, 3mm 24ga or 2.3mm 26ga
Recommended Findings for the White Enamel Sunburst Paperclip:
- Clasps – 3.5x8mm Rectangle Lobster , 5x9mm Rounded Lobster or 5mm Spring
- Soldered Ring (Closed) – 5mm 22ga or 5mm 20.5ga
Click here to learn about gold filled, plated and vermeil
View Abbreviation Guide
Tips, Tricks and How To's! Follow Stones and Findings on YouTube
