Test out our Half Flat Dapped Sunburst Twist chain with this 7″ sample.
This is sold by individual 7 inch samples pieces. You will not receive continuous lengths if ordering more than one piece.
If you wish to purchase this chain by the meter please click this link
Sunburst Dapped Link Measurement:
- OD: LxW- 3.99 x 2.39mm
- Thickness: 0.15mm, 38ga
- ID Link: 0.51mm
Curb Link Measurement:
- OD: LxW- 1.99 x 1.33mm
- Thickness: 0.49mm, 25ga
- ID Link: 0.51mm
Recommended Jump Rings for Curb Link or Dapped Link (ID the same):
A) For the End Link of the chain:
- What gauge open jump ring to use: Up to 26ga, 0.64mm
- Recommended open jump ring/ wire: Link is very small. Best to wire wrap if not soldering. Wire wrap with 26ga Wire By-the-Meter
- If soldering / welding – 2.3mm 26ga
- 3mm 24ga is a tight fit. You can enlarge link with a pin or thumbtack. Watch this video to see how to enlarge the end loop for easier use.
B) For the Links Within the chain:
These jump rings are perfect for sizing your permanent jewelry pieces and for attaching charms along the chain.
- What gauge open jump ring to use: Up to 26ga, 0.64mm
- Recommended open jump ring/ wire: Link is very small. Best to wire wrap if not soldering. Wire wrap with 26ga Wire By-the-Meter
- If soldering / welding – 2.3mm 26ga
Recommended Findings for the Sunburst Chain:
- Clasps – 3.5x8mm Rectangle Lobster , 5x9mm Rounded Lobster or 5mm Spring
- Soldered Ring (Closed) – 5mm 22ga or 5mm 20.5ga
How Dapped Chains Are Made:
Dapped chains begin as standard machine-made chains, such as cable or curb styles. These chains pass through precision steel rolling stamps called dapping tools, which mechanically flatten—or “dap”—one or both sides of each individual link. This process adds a mirror-like shine or a delicate faceted texture, all without using cutting tools to shape the metal. Because dapping reshapes rather than removes metal, it preserves the surface integrity, an essential benefit for materials like gold filled.
During production, the chain’s link dimensions may vary slightly, usually within ±5% to account for compression, stretching, or normal wire gauge differences. For instance, a 2.00 mm link may measure between 1.90 mm and 2.10 mm. As a result, some recommended jump rings may fit more tightly than others. However, the end link will always accommodate a 26ga jump ring.
Click here to learn about gold filled, plated and vermeil
View Abbreviation Guide
Tips, Tricks and How To's! Follow Stones and Findings on YouTube
