Test out our Tube Station Cable chain with this 7″ sample.
This is sold by individual 7 inch samples pieces. You will not receive continuous lengths if ordering more than one piece.
If you wish to purchase this chain by the meter please click this link
Tarnish Resistant Coating: This chain has been treated with a hypoallergenic molecular bonding process that will help your pieces resist tarnishing. It protects against in stock oxidation – UV rays while on display, while in storage and from customers trying on the pieces. This treatment will keep your pieces bright longer but still allow you to solder or chemically oxidize the chain.
Tube Bead Measurement:
- LxW: 3.79 x 1.88mm
- Average spacing between the beads: 9.42mm
Cable Link Measurements:
- OD: LxW- 2.36m x 1.60mm
- Wire Thickness: 0.40mm, 26ga
- ID: 0.83mm
Recommended Jump Rings:
A) For the End Link of the chain:
- What gauge wire to use: Up to 20ga, 0.84mm
- Recommended: 4mm 20ga
- If soldering / welding: 3mm 24ga, 2.5mm 26ga or 3mm 26ga
B) For the Links Within the chain:
These jump rings are perfect for sizing your permanent jewelry pieces and for attaching charms along the chain.
- What gauge wire to use: Up to 22ga, 0.64mm
- Recommended: Link is very small. Best to wire wrap if not soldering. Wire wrap with 24ga Round Wire By-the-Meter
- If soldering / welding: 3mm 24ga, 2.5mm 26ga or 3mm 26ga
Recommended Findings for the Tube Station Cable Chain:
- Clasps – 5mm Spring Clasp, 3x8mm Rectangle Lobster Clasp or 5x9mm Rounded Lobster Clasp
- Soldered Ring (Closed) – 5mm 22ga Closed Rings or 6mm 18ga Closed Rings
View Abbreviation Guide
Tips, Tricks and How To's! Follow Stones and Findings on YouTube
