7″ Sample Chain Green Enamel Cable Chain Sterling Silver .925 – August

Test out ourGreen Enamel Cable chain with this 7″ sample. 

This is sold by individual 7 inch samples pieces. You will not receive continuous lengths if ordering more than one piece.

Tarnish Resistant Coating: This chain has been treated with a hypoallergenic molecular bonding process that will help your pieces resist tarnishing. It protects against in stock oxidation – UV rays while on display, while in storage and from customers trying on the pieces. This treatment will keep your pieces bright longer but still allow you to solder or chemically oxidize the chain.

Cable Link Measurement:

• OD: LxW- 2.01mm x 1.37mm
• Thickness: 0.40mm, 26ga
• ID: 0.66mm

Enamel Measurement:

• Avg. Size: 2.03mm. These small enamel beads might slightly differ in size and shape.
• Spacing between beads averages 8.37mm
• About Enamel: The enamel beads are fused to the chain with high heat. They are long lasting, however if high pressure is applied, these beads can break or crack. If exposed to chemicals, you may see discolouring.

Recommended Jump Rings:

A) For the End Link of the chain:

• What gauge wire to use: Up to 24ga, 0.50mm
  • Recommended: Link is very small. Best to wire wrap if not soldering. Wire wrap with 24ga Round Wire By-the-Meter
  • If soldering / welding: 3mm 24ga, 2.5mm 26ga or 3mm 26ga

B) For the Links Within the chain:

These jump rings are perfect for sizing your permanent jewelry pieces and for attaching charms along the chain.

• What gauge wire to use: Up to 24ga, 0.50mm
  • Recommended: Link is very small. Best to wire wrap if not soldering. Wire wrap with 24ga Round Wire By-the-Meter
  • If soldering / welding: 3mm 24ga, 2.5mm 26ga or 3mm 26ga

Recommended Findings for the Peridot Green Enamel Cable Chain:

• Clasps – 3x8mm Rectangle Lobster , 5x9mm Rounded Lobster or 5mm Spring
• Soldered Ring (Closed) – 5mm 22ga or 5mm 20ga

View Abbreviation Guide

Tips, Tricks and How To's! Follow Stones and Findings on YouTube