This beautiful Sunburst Mariner Chain in Sterling Silver .925 is a popular chain design: 1 to 1 smooth wire link to sunburst link.
If you wish to purchase samples of this chain please click this link
Tarnish Resistant Coating: This chain has been treated with a hypoallergenic molecular bonding process that will help your pieces resist tarnishing. It protects against in stock oxidation – UV rays while on display, while in storage and from customers trying on the pieces. This treatment will keep your pieces bright longer but still allow you to solder or chemically oxidize the chain.
Round Wire Link Measurement:
- OD Link: 4.68×2.26mm
- Thickness: 25.5ga, 0.50mm
- ID: 1.01mm
Sunburst Link Measurement:
- OD: LxW- 4.68 x 2.35mm
- Thickness: 25ga, 0.44mm
- ID: 0.92mm
Recommended Jump Rings:
A) For the End Link of the chain:
- What gauge wire to use: Up to 22ga, 0.64mm
- Recommended: Link is very small. Best to wire wrap if not soldering. Wire wrap with 24ga Round Wire By-the-Meter
- If soldering / welding: 3mm 22ga, 3mm 24ga or 3mm 26ga
B) For the Links Within the chain:
These jump rings are perfect for sizing your permanent jewelry pieces and for attaching charms along the chain.
- What gauge wire to use: Up to 24ga, 0.50mm
- Recommended: Link is very small. Best to wire wrap if not soldering. Wire wrap with 24ga Round Wire By-the-Meter
- If soldering / welding: 3mm 24ga, 2.5mm 26ga or 3mm 26ga
Recommended Findings for the Sunburst Mariner Chain:
- Clasps – 3x8mm Rectangle Lobster , 5x9mm Rounded Lobster or 5mm Spring
- Soldered Ring (Closed) – 5mm 22ga or 5mm 20ga
View Abbreviation Guide
Tips, Tricks and How To's! Follow Stones and Findings on YouTube
