Beautifully made with a spectacular look. This Light Half Flat Dapped Bar Chain in 14kt Gold Filled is beautiful alone or embellished.
Flat Bar Link Measurement:
- Bar length: 11.65mm
- Bar width: 1.15mm
- Bar wire thickness: 0.35mm, 28.5ga
- Recommended open jump ring/ wire: ID link is very small.
- Best to wire wrap: 26ga Round Wire By-the-Meter
HOW IT’S MADE: Flattening sections of chains is called “dapping”. The factory first makes the cable chain that you see with the links, then they run it through a dapping machine that flattens sections of the chain (with force, like pounding it). The links in the flattened section are not soldered, melted or glued in any way. The flattened links add interest and reflect light differently, even when the flattened links don’t stay in sections together – they glisten. With bending and twisting the flattened links will not necessarily stay together in the bar shape, but will stay in wearable freeform.
Round Link Wire Measurements:
- OD: 1.37×1.65mm
- ID: 0.66mm
- Wire thickness: 0.39mm, 27.5ga
- What gauge open jump ring to use: Use up to 22ga, 0.64mm
- Recommended open jump ring/ wire: ID Link is very small.
- Best to wire wrap: 24ga Round Wire By-the-Meter
- If soldering/ welding: 3mm 24ga Open Jump Ring
- Best to wire wrap: 24ga Round Wire By-the-Meter
Recommended Findings for the Half Flat Cable Chain:
- Clasps – 5mm Spring Clasp, 3.5x8mm Rectangle Lobster Clasp or 5x9mm Rounded Lobster Clasp
- Soldered Ring (Closed) – 5mm 22ga Closed Rings or 5mm 20ga Closed Ring
Are you making Permanent Bracelets? Check out our best sellers
Click here to learn about gold filled, plated and vermeil
View Abbreviation Guide
Tip, Tricks and How To's! Follow Stones and Findings on YouTube