Finishing a leather necklace or bracelet with a knotted end is quite simple, but it produces a rustic and natural aesthetic that can be just what your accessory calls for. Our example uses a Thin Round Leather Strand and a 5mm Soldered Ring
Performing the Leather Knot End
Slide the leather strand through the 5mm ring, and then fold a length of it back with the rest of the leather. Don’t be afraid to give yourself a generous amount of slack to work with, because you’ll always be able to trim the excess. Now, making sure to keep the two side-by-side strands of leather close to each other, form a loop and slide the ring through it. Do not finish the knot immediately; take your time and edge the knot as close to the ring as possible. If you do this when the knot is still a little bit loose than you will still have room to make adjustments- once you finish the knot tightly it will be difficult to undo. Finally, when you’re satisfied that the knot is neat and looks good, pull it taught to secure the ring. Finished!