Category Archives: Design & Product Knowledge

In this video, I demonstrate the best and easiest way to turn a pendant into a connector, by welding a jump ring onto a bezel. A bezel is a method of stone setting, whereby a strip of metal (in this case silver) encases the edge, surrounding the stone. Round bezels are the hardest to connect because […]

In this video, I show tricks to weld super fine jump rings. Both sides of the jump ring must be touching sufficiently before you weld. Otherwise, “blowout” happens – where the gap becomes bigger as the wire ends roll back. When jump rings are 26 gauge (0.45mm) or thinner, they are very hard to see. Also, sometimes […]

In this video, I demonstrate how easy it is to weld an invisible connection with a briolette (drop stone bead) for permanent bracelets. The result is that no wire is showing, and the drop bead looks like it is floating on the chain. Find wire that is thin enough to go through the hole of the […]

This video shows you how easy it is to attach a briolette (teardrop) stone by welding.  It only takes seconds, and anyone can do it – as opposed to wire wrapping, which takes time and some skill. You can use the thickest wire that can go through the teardrop bead.  Depending on the size of […]